Lets look at the purpose of the three grandfather clock weights. You want to stop just short of the fullest wind possible.
Spring driven clocks have to be wound up all the way to run for the period of time for which the clock is designed.
How to fix a grandfather clock wound to tight.
The grandmother and grandfather chain drive units often do not have this feature.
If it will tick when you pull on the weight but wont run with the pendulum on then there is not enough power getting to the pendulum.
From the repair persons point of view it needs cleaning.
Grandfather clock weights stuck.
When winding the weights up make sure you can always see the top of the weight.
When you do wind your clock just make sure you have a tight fitting key and that it is inserted all the way.
If you have three weights on your grandfather clock and the weights are not moving the clock is not going to chime or keep time.
The more you take the time to wind the more wear you are putting your clock through.
Turn the key slowly and just a half turn at a time.
Click here for the fix.
It does not give ourcorrect time and frequently stops 2.
Do not try to force it to wind any further.
Some clocks will run faster if they are wound too tightly in the first 24 hours after youve tightened the mainspring.
When i take out pendulum it runs fast and shows 100 more than the accurate for slow and down time 3.
If your timepiece has a tiny pendulum you may need to wind it more often.
The winding mechanism will only turn so many times or turns.
The grandfather clock weights can get stuck in the high position if over wound.
Take the clock to a clock repair place and warn the watchmaker that the spring is wound so tight that its highly stressed or less likely have a go at repairing the clock myself remembering that its going to come apart violently if i dissemble it or.
Wind it up until it stops.
Powers the time train and keeps the pendulum swinging.
Essentially from the users perspective it is.
If a clock needs repair and it is wound fully many times the mainspring will stick.
Each coil of the mainspring has only a fraction of the power.
If you dont care for my videos then leave this video has been on my computer for some time now so i thought id share it with you.
This gives the appearance of the clock being wound too tight.
Some larger clocks have over wind protection to prevent this.
It would mean at least lubrication or possibly a full overhaul or areplcaement movement maybe a cheaper option.
Of course grandfather clocks are different than spring driven clocks such as wall clocks or mantle clocks.
How i can fix my citizen poppo battery operated wall clock.
Even though it is impossible to over wind your clock.
Powers the hour strike and count middle weight.
The clocks movement is inaccurate.
I got this clock from a friend who rescued it from a.
The most common cause of this is wear in the pivot holes.
No comments:
Post a Comment