Prepare the bathtub repair kits filler paste per the directions included with the kit. Sand the chipped area with 220 grit sandpaper until the edges are smooth.
Step 3 put the filling paste on the chip and rub it in with your finger.
How to fix a chipped bathtub.
Apply the epoxy to the chip with a.
Sand the chipped area with 80 100 grit sandpaper to smooth out and level the edges.
If you click on those links i may earn a small commission at no extra charge to you.
Protect the surrounding area with blue tape to make sure you arent scuffing up the rest of your tub.
This post has links to products i used to do this project.
Theres no need to refinish the entire bathtub to fix one small problem.
How to fix a chipped bathtub repairing small chips with epoxy buy a 2 component epoxy kit for chip repair.
Scrub the damaged area with a sponge and soap or tub cleaner then dry it.
Clean the area with an abrasive cleaner like comet and rinse it thoroughly with water before drying it off with a clean rag or paper towel.
To avoid scratches on the surrounding porcelain surface sand only in the damaged area.
Clean the sanded area with a cotton swab dipped in rubbing alcohol.
Read how to fix a chipped bathtub and how to repair a cracking and peeling bathtub with an epoxy finish.
Follow the directions on your epoxy kit to mix the 2 components together.
Thanks for your support.
The surface must be completely dry so that the repair compound can stick.
No comments:
Post a Comment