One way to tell if a seal is bad is the paper test. Fixing gaps close the refrigerator door and inspect the gaps.
Loosen the screws to where they are pretty loose but not out.
How to fix a refrigerator seal.
Peel back the inside edge of the old gasket at a midpoint on a long side of the.
Every 12 months or so check to see if your refrigerator gaskets are in good condition.
Lay the new gasket out in the sun or place it in a bowl of warm water to remove any.
Put a piece of paper between the door and the fridge close the door and then pull.
Remove the old deteriorated door gasket by pulling back and lifting the inside flange.
Rub petroleum jelly on the entire gasket to fix small gaps.
Lift up the door seal and locate the screws underneath that hold the seal in place.
Lay the new gasket in warm water for 5 minutes to make it more pliable.
How to fix a refrigerator door seal step 1.
If the paper slips out easily its time to replace the gaskets because it isnt sealing.
Step 1 fixing a refrigerator door seal.
Note to save energy you can turn off your.
To replace the seal on your refrigerator door start by submerging the new gasket in warm water so that its softer and more pliable.
Repair a gap in the corner of the door gasket by grasping the gasket at the corner of.
Then remove the old gasket by lifting the edge up and turning the screws underneath.
Unplug the refrigerator so that it doesnt try to cool with the door.
Close the door and inspect it for gaps.
If gaps are still present replace the door.
Fixing a refrigerator door seal.
Once youve loosened the screws pull off the old gasket and dispose of it.
How to repair a fridge door seal repair a deformed but otherwise sound gasket corner or gasket section by wiping off any dirt.
Grab a phillips head screw driver.
No comments:
Post a Comment