How To Fix A Candle Wick That Is Too Short

Wednesday, October 25, 2017

How To Fix A Candle Wick That Is Too Short

Light the wick and let it burn for 20 to 30 minutes. If your wick was cut too short or broke off start by trying these simple things to fix it light the wick and let it burn for 20 to 30 minutes checking the flame height occasionally to see if it looks as big as it should.

Wood Wicks Rosmarino Candles

How To Save Drowning Wick Candle Tip

Candle Care

If the wick disappears underneath hardened wax melt down the wax and pour off the excess.

How to fix a candle wick that is too short.

There are a few reasons why the wick can be too short.
Alternatively you can attatch a piece of string to the wick.
Youll see here how two of these candle wicks have been cut too short.

Allow wax to drip to the sides of the candle or onto the foil or pan.
They held a flame for a short while but soon drowned once the wax melted and surrounded the wick.
If the flame remains weak blow out the candle and pour the wax it melted onto a paper plate.

Next pour off the excess wax until the wick is exposed.
Warm the candle wax in the wick area by holding the flame of the lighter directly over it.
Use a lighter or hair dryer to soften the wax covering the wick.

Fortunately you have a few options for fixing a candle wick thats too short.
Heres a step by step on how you can save a drowning candle wick.
Check the flame height occasionally to see if the problem works itself out.

Home candle candle wick too short how to fix a candle wick how to fix a candle wick candles can be used to accent decor fill the air with scent set the temper and release tension.
The main one is that whoever made the candle did not use the right wick for the size of candle.
First put the candle on a surface you dont mind getting messy.

If you dont feel like going at it with a knife hold a lit match where the wick appears until a considerable amount of wax has melted then you can drain the liquid wax and you should have a longer wick.
Move the lighter around a bit until the entire wax area near the wick is softened 30 seconds or less in many cases.
Sometimes they work themselves out.

Theres a simply remedy you can try to help fight the good fight and save that candle.
If the wick is too small for the candle then you will get a small wick protruding above the wax and a small flame which does not let the wax fully melt across the the diameter of the candle.
Chisel the top of the candle so the wick is a bit longer.