Remove the radiator hose. Radiator hoses are fairly easy to replace but its not a repair you can make while your car is steaming by the side of the road.
Make sure that the parking brake is on and that the car is in neutral or park before you start work.
How to fix a radiator hose.
Use the screwdriver to loosen the clamps.
Determine the source of the leak.
Once youve got the new hose you can start the replacement process by draining your vehicles coolant.
For example the clamps that secure the hose to the.
How to fix a cracked radiator hose.
Follow these steps to replace a radiator or heater hose.
Check each hose for rips or tears particularly the hose connected to the broken part on the radiator.
Unscrew the metal rings connecting the hoses to the radiator and brush any debris from the openings.
Then attach the new hose and refill the radiator.
Turn off the engine and let it cool down for 30 minutes.
Once the clamps are loose you can remove the hose.
Find the radiator hoses under the hood and locate the metal clamps at either end.
Tighten the radiator clamps with a screwdriver.
There should be a drain plug on the bottom of your radiator usually on the drivers side or you can simply remove one end of the lower radiator hose.
Open the hood and examine the radiator hoses.
Loosen the hose clamps and remove the hose.
Some newer cars have the hose designed to be a permanent fixture at which time a professional is needed.
Disconnect the hoses from the radiator after allowing the vehicle to cool down.
First take off the radiator cap then drain the coolant.
Remove the pressure cap from the radiator or coolant reservoir and place a bucket or drain pan under the radiator drain valve.
No comments:
Post a Comment