Lift out the loose tile with a putty knife. Probably the easiest fix your loose toilet may simply be due to your loose toilet mounting bolts needing to be tightened.
This is a simple quick video on how to tighten your.
How to fix a wobbly toilet on tile floor.
Fix your loose wobbling or rocking toilet in 2 minutes using less than 2 dollars.
Loose or broken closet bolt making toilet wobble.
Check the other bolt to make sure it is equally snug.
Add two more stacked shims 3 inches to the left and another two 3 inches to the right of the first set of shims.
How to fix a wobbly or loose toilet if your toilet is wobbly or uneven and moves when you get off the of the seat than this video is helpful.
Check the flange bolt at each side of the toilet using a pair of pliers or a small wrench.
Simply remove the small plastic bolt caps at the base of your toilet they will be on each side and can be pried off with a small screwdriver.
Tighten the nuts on the toilet bolts with a wrench.
1 turn off water to toilet by closing shut off valve.
How to caulk a toilet base to tile floor like the pros duration.
Spray lubricant on the nuts if they are difficult to turn.
Set the tile aside.
If its out of level it may be necessary to shim the toilet.
Tightening the bolts too much can crack the brittle porcelain of the toilet for which there is no repair.
Carefully lift the loose tile with a putty knife working from center to edges on all four sides.
If a bolt is loose tighten it slowly just until it is snug.
3 sop up remaining water from tank and bowl with sponge or turkey baster.
Slide them under the front of toilet base.
Lift out the loose tile with a putty knife.
Stack two wood shims on top of one another.
In this video this old house plumbing and heating expert richard trethewey explains how to fix a wobbly toilet.
Avoid tightening the nuts too much you can break the toilet.
If a bolt turns when you turn the nut hold the bolt steady with locking pliers while you turn the nut.
2 flush toilet and hold down the lever to empty tank.
Put new closet bolts on the toilet flange and replace the wax ring.
Put the toilet back on the closet bolts.
Carefully lift the loose tile with a putty knife working from center to edges on all four sides.
Push on the toilet to see if it wobbles.
Push both shims toward the toilet until the toilet does not wobble.
No comments:
Post a Comment